Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack
Cellink Neo 8+s 7500mAh dashcam battery pack

Cellink Neo 8+s 7500mAh dashcam battery pack

Kortingsprijs€299,00
In stock
Quantity:

This Cellink Neo 8+s 7500mAh is the latest dashcam power bank from Cellink. It is specially designed to use your dashcam's parking mode without draining your car battery. The Neo8+s has a capacity of 7500mAh and its slim design allows you to neatly conceal it in almost any car. It is also equipped with Bluetooth, allowing you to easily connect to your phone to view the remaining capacity and other information.

The Cellink Neo 8+s comes with all the necessary accessories to professionally install and integrate it into your vehicle. The Cellink Neo 8+s 7500mAh is made of durable materials and has a sturdy aluminum housing that can withstand shocks and temperature fluctuations. This Cellink Neo 8+s is the universal alternative to the BlackVue Power Magic Ultra Battery B-124E and is made by the same manufacturer.

Hardwire connection

The advanced Cellink Neo 8+s 7500mAh can be connected directly to a switched fuse or other power point in the car so that it is only charged while driving. After turning off the car's ignition (and thus interrupting the power supply to the Cellink), the Cellink will automatically supply power to the dashcam along with a signal that the parking mode on the dashcam can be activated. This way, you don't have to worry about it anymore.

A special 3-wire output cable is supplied with the Cellink Neo8+s to transmit the signal to the dashcam. Connect the 3-wire hardwire kit of your dashcam (which you would normally connect to the car's fuse box) to this cable.

Plug&Play connection

At Allcam, we supply the Cellink Neo 8+ with a cigarette lighter adapter and female cigarette lighter connector. The cigarette lighter adapter allows you to easily charge the Cellink while driving without connecting it to the fuse box. Please note that charging via this method takes a little longer.

With the female (output) cigarette lighter connector, it is also possible to connect the cigarette lighter power supply of the dashcam to the Cellink for easier installation. Please note that with most dashcams, parking mode will not work via this connection. Only dashcams with software-based (visual) parking mode will work in parking mode. Connection with the 3-wire hardwire kit is therefore recommended.

Up to 30 hours of power*

The Cellink Neo 8+s charges within 50 minutes while driving (with hardwire power supply) and then provides up to 30 hours of power to the dashcam without further draining the car battery. Once the Cellink is empty, the dashcam will switch off and will not drain the car battery any further.

* The operating time can vary greatly depending on the dashcam model. Dashcams with multiple active functions (Cloud, GPS, etc.), higher resolution, or multiple cameras consume more power and the operating time may be reduced to around 10 hours.

Specifications

Capacity: 7500mAh 96kWh

Cigarette lighter input: 12V-17V 6.5A Max

Hardwire power input: 12V-17V 13.5A max

Output: 11V-14.2V 2A Max

Cigarette lighter charging time: 80 minutes

Hardwire charging time: 50 minutes

Operating time: Up to 30 hours (based on 3Wh dashcam)

Weight: 1450 grams

Dimensions: 20.5*15.1*3.2 cm

Cable lengths:

- Hardwire input cable: 3.0m

- Hardwire output cable: 1.8m

- Cigarette input cable: 1.5m

- Cigarette output cable: 0.1m (you can connect the long cigarette power supply of the dashcam to this)