Nanocam M68 4K 2CH Wifi GPS 32gb dashcam

The Nanocam M68 4K dashcam is the perfect camera to record all your journeys in the sharpest image quality. This high-end dashcam films everything in front of and behind your car, and thanks to the handy parking mode, it also works as a surveillance camera when your car is parked. The built-in Wifi allows you to easily view the images on your phone, and the GPS tracks the speed and locations of your journeys.

4K + FullHD resolution

The Nanocam M68 4K is equipped with the latest Galaxy GC8613 8.0MP image sensor, which guarantees the sharpest Ultra 4K videos with a resolution of 3840p*2160p at 24fps. The rear camera records in FullHD (1080p) resolution. HDR technology ensures perfect image quality in all weather conditions. The dashcam can also take photos in 18M pixels.

FullHD rear camera

The rear camera films in FullHD 24fps resolution and can be easily connected to the front dashcam. It is connected with a long 6-meter cable and the videos are stored simultaneously on the SD card. The cable can be extended by 10 meters for longer vehicles with the optional 10m extension cable.

Night vision

Thanks to the high-quality 8.0MP image sensor, the images are also of the highest quality at night. WDR technology (Wide Dynamic Range) ensures that the contrast and brightness of the images are optimally adjusted.

Includes 32GB Micro SD card

The Nanocam M68 4K comes standard with a 32GB Micro SD card so you can start recording right away. The dashcam also supports larger Micro SD cards up to 256GB. The included 32GB card can store approximately 2 hours of video in 4K + FullHD.

In lower FullHD + FullHD resolution and with a 256GB card, you can store up to 26 hours of video. Thanks to loop recording, the oldest images are always automatically overwritten by new ones, so the camera always continues recording.

2.0-inch LCD

The clear 2.0-inch LCD screen makes operating the menu and viewing recordings a breeze. The user-friendly menu is available in Dutch and is very intuitive. The screen turns off automatically after 1 minute of filming to avoid distracting the driver, but the camera continues to film. The screensaver can be turned off via the menu.

Wifi

The Nanocam M68 is equipped with Wifi, allowing you to view live and stored images super easily via your smartphone. Via Wifi, you can log in to the dashcam within range (+/- 5 meters) and operate it via your phone. This means you don't have to remove the SD card from the camera to view images. The Nanocam M68 uses the KaCam App for iOS (Apple) and Android phones and tablets.

Built-in GPS

The M68 4K has a built-in GPS receiver. The GPS allows the speed to be displayed on the screen and the coordinates of the locations where the footage was filmed to be tracked. This allows you to use the included software to see exactly where certain recordings were made.

CPL filter option

To improve image quality and reduce reflections, you can expand the Nanocam M68 with the optional universal CPL filter (see accessories). This filter acts as a kind of Polaroid sunglasses for the lens and can be useful in sunny conditions.

Self-adhesive holder

The M68 comes with a self-adhesive holder. The sturdy holder ensures that the dashcam stays in place and that the recordings do not contain unnecessary vibrations. The holder is mounted on the windshield with a 3M sticker and the dashcam clicks into the holder. The lens can be rotated vertically to position it correctly on the road.

Automatic parking mode

The M68 4K dashcam has a handy automatic parking mode with two options:

Time lapse (1fps): The camera films continuously at 1fps time lapse, including with the rear camera. In this mode, the camera takes a photo every second, which is later played back as a fast-motion video. Time lapse is an economical recording mode, which means that the dashcam does not use too much power or data. This allows up to 30 times more videos to be stored on the SD card.

Vibration detection: The dashcam switches off with the ignition and when a vibration is detected, the camera turns on and starts a short 1-minute recording.

* The automatic parking mode of the M68 4K only works in combination with the optionally available Nanocam NH03 hardwire kit and cannot be switched on and off manually. In combination with the hardwire kit, the camera automatically switches to parking mode when the car is turned off and starts normal recording when you start the car again. So once installed, you don't have to worry about it anymore.

Loop recording

With loop recording, all recordings are stored in shorter 3-minute segments. Once the SD card is full, the oldest videos are automatically deleted and overwritten for new recordings. This ensures that the most recent journeys are always stored on the SD card. When tilting occurs, the current file is secured so that it cannot be overwritten.

170˚ wide-angle lens

This M68 4K has a 170˚ wide-angle lens at the front and rear. This allows a very large area around the car to be recorded.

Auto start

The Nanocam M68 4K dashcam starts filming automatically as soon as power is supplied. Simply connect it to the car charger and you don't have to worry about it anymore. If your car provides permanent power via the cigarette lighter, it is wiser to use the hardwire kit to save the car battery.

G-sensor

The built-in G-sensor registers collisions or violent vibrations. In the event of an impact, images are automatically saved so that they are not lost. They cannot be overwritten or deleted via the dashcam.

Built-in microphone

The Nanocam M68 4K has a built-in microphone so that sound is also recorded. The microphone can be easily switched on and off with a single press of a button.

Date/time/license plate watermark

The date, time, and license plate can be displayed at the bottom of each video. This makes it easy to see later where, when, and with which vehicle recordings were made.

Convenient dual USB cigarette lighter power supply

This M68 dashcam comes with a handy dual USB cigarette plug and a separate 3.5-meter cable. This gives you an extra USB port for charging your phone.

Please note: When connecting to an existing USB port in the car, this USB port must supply at least 2.5A. With a lower output, the dashcam will not function or will function poorly.