Nanocam M93 Pro 5K Touch Wifi GPS 64gb dashcam

The Nanocam M93 Pro is the first 5K dashcam. With this high-quality dashcam, you can record everything around your car in crystal-clear quality. The Nanocam M93 Pro is equipped with virtually every feature you could want, such as a large 4.0-inch touchscreen LCD display, Wifi, and GPS. The extensive parking mode also protects your car while parked, and with support for 512GB Micro SD cards, you can store several days of video.

5K resolution

The Nanocam M93 Pro is the first dashcam with 5K resolution. This dashcam records videos in widescreen 5160p * 2160p. When you connect the rear camera, the resolution is adjusted to 4K + FullHD. You can also set the resolution lower to store more data on the SD card.

FullHD rear camera

The rear camera films in FullHD 30fps resolution and can be easily connected to the front dashcam. It is connected with a long 6-meter cable and the videos are stored simultaneously on the SD card. With the rear camera connected, the resolution of the front camera is automatically adjusted to FullHD.

Night vision

Thanks to the high-quality 8.0MP image sensor, the images are of the highest quality even at night. WDR technology (Wide Dynamic Range) ensures that the contrast and brightness of the images are optimally adjusted.

Includes 64GB Micro SD card

The Nanocam M93 Pro 5K comes standard with a 64GB Micro SD card so you can start recording right away. The dashcam also supports larger Micro SD cards up to 512GB. The included 64GB card can store approximately 4 hours of video in 4K + FullHD.

In lower FullHD + FullHD resolution and with a 512GB card, you can store up to 54 hours of video. Thanks to loop recording, the oldest images are always automatically overwritten by new ones, so the camera always continues recording.

4.0-inch touchscreen LCD

The large and clear 4.0 inch LCD screen with touch screen makes operating the menu and viewing recordings a piece of cake. The user-friendly menu is available in Dutch and is very intuitive. With the adjustable screensaver, you can have the screen turn off after a few minutes of driving or display the speed on the screen.

Wifi

The Nanocam M93 Pro is equipped with Wifi, allowing you to view live and stored images super easily via your smartphone. Via Wifi, you can log in to the dashcam within range (+/- 5 meters) and operate it via your phone. This means you don't have to remove the SD card from the camera to view images. The Nanocam M93 Pro uses the KaCam App for iOS (Apple) and Android phones and tablets.

Built-in GPS

The M93 Pro 5K has a built-in GPS receiver. The GPS allows the speed to be displayed on the screen and the coordinates of the locations where the footage was filmed to be tracked. This allows you to use the included software to see exactly where certain recordings were made.

CPL filter option

To improve image quality and reduce reflections, you can expand the Nanocam M93 Pro with the optional universal CPL filter (see accessories). This filter acts as a kind of Polaroid sunglasses for the lens and can be useful in sunny conditions.

2 self-adhesive holders

The dashcam comes with two self-adhesive holders, ideal for using the dashcam in multiple cars. The sturdy holder ensures that the dashcam stays in place and that the recordings do not contain unnecessary vibrations. The holder is mounted on the windshield with a 3M sticker and the dashcam clicks into the holder. The camera can be rotated in all directions for optimal positioning.

Automatic parking mode

The M93 Pro 5K dashcam has a handy automatic parking mode with four options:

Time lapse (1fps): The camera films continuously at 1fps time lapse, including with the rear camera if fitted. In this mode, the camera takes a photo every second, which is later played back as a fast-motion video. Time lapse is an economical recording mode, which means that the dashcam does not use too much power or data. This allows up to 30 times more videos to be stored on the SD card.

Motion detection: The camera turns off when you turn off the car's ignition and goes into standby mode until a vibration is detected by the G-sensor. In that case, a normal 1-minute recording starts.

Vibration detection: The dashcam turns off with the ignition and when a vibration is detected, the camera turns on and starts a short 1-minute recording.

Normal recording: The dashcam continues recording when the car's ignition is turned off.

* The automatic parking mode of the M93 Pro 5K only works in combination with the optionally available Nanocam NH03 hardwire kit and cannot be switched on and off manually. In combination with the hardwire kit, the camera automatically switches to parking mode when the car is turned off and starts normal recording when you start the car again. So once installed, you don't have to worry about it anymore.

Loop recording

With loop recording, all recordings are stored in shorter 5-minute segments. Once the SD card is full, the oldest videos are automatically deleted and overwritten for new recordings. This ensures that the most recent journeys are always stored on the SD card. When tilting occurs, the current file is protected so that it cannot be overwritten.

150˚ wide-angle lens

This M93 Pro 5K has a 150˚ wide-angle lens at the front and 150˚ at the rear. This allows a very large area around the car to be recorded.

Auto start

The Nanocam M93 Pro 5K dashcam starts recording automatically as soon as power is supplied. Simply connect it to the car charger and you don't have to worry about it anymore. If your car provides permanent power via the cigarette lighter, it is wiser to use the hardwire kit to save the car battery.

G-sensor

The built-in G-sensor registers collisions or violent vibrations. In the event of an impact, images are automatically saved so that they are not lost. They cannot be overwritten or deleted via the dashcam.

Built-in microphone

The Nanocam M93 Pro 5K has a built-in microphone so that sound is also recorded. The microphone can be easily switched on and off with the push of a button.

Date/time/license plate watermark

The date, time, and license plate can be displayed at the bottom of each video. This makes it easy to see where, when, and with which vehicle recordings were made.

Convenient dual USB cigarette lighter power supply

This M93 Pro dashcam comes with a handy dual USB cigarette plug and a separate 3.5-meter cable. This gives you an extra USB port for charging your phone.

Please note: When connecting to an existing USB port in the car, this USB port must supply at least 2.5A. With a lower output, the dashcam will not function or will function poorly.